STOCKIST GRACO PUMP TERBAIKKami menjual product diaphragm pump merk Graco untuk kebutuhan project anda. Graco pump adalah pompa dengan kualitas terbaik dunia.
Husky Diaphragm Pump, Piston Pump, Ink Pump, Chemical Pump, Oil Pump, Paint Pump, Aodd Pump. Tersedia Berbagai Jenis Material; Plastik, Alumunium, Stainless Steel. Tersedia Stok Berbagai Ukuran 1/ 2 In, 3/ 4 In, 1 In, 1, 5 In, 2 In, 3 In. Husky 515, 716, 1050, 1590, 2150, 3300
Hubungi kami :
Hubungi kami :
WA : 08111-200135
Hp. 0813-17645439
| Husky 1050 Air-Operated Diaphragm Pump | |
| Maximum fluid working pressure |
125 psi
|
| Air pressure operating range |
20-125 psi
|
| Fluid displacement per cycle |
0.17 gal
|
| Air consumption |
25 scfm at 70 psi, 20 gpm
|
| Maximum values with water as media under submerged inlet conditions at ambient temperature: | |
| Maximum air consumption |
67 scfm
|
| Maximum free-flow delivery |
50 gpm
|
| Maximum pump speed |
280 cpm
|
| Maximum suction lift (varies widely based on ball/seat selection and wear, operating speed, material properties, and other variables) |
16 ft dry, 29 ft wet
|
| Maximum size pumpable solids |
1/8 in
|
| Recommended cycle rate for continuous use |
93 - 140 cpm
|
| Recommended cycle rate for circulation systems |
20 cpm
|
| Sound Power* | |
| at 70 psi (4.8 bar, 0.48 MPa) and 50 cpm |
78 dBa
|
| at 100 psi (7.0 bar, 0.7 MPa) and full flow |
90 dBa
|
| Sound Pressure** | |
| at 70 psi (4.8 bar, 0.48 MPa) and 50 cpm |
84 dBa
|
| at 100 psi (7.0 bar, 0.7 MPa) and full flow |
96 dBa
|
| Fluid temperature range |
See Manual
|
| Air inlet size |
1/2 npt(f)
|
| Fluid inlet size | |
| Aluminum (1050A), Hastelloy (1050H) or Stainless Steel (1050S) |
1 in npt(f) or 1 in bspt
|
| Conductive Poly (1050C), Polypropylene (1050P), or PVDF (1050F) |
1 in raised face ANSI/DIN flange
|
| Fluid outlet size | |
| Aluminum (1050A), Hastelloy (1050H) or Stainless Steel (1050S) |
1 in npt(f) or 1 in bspt
|
| Conductive Poly (1050C), Polypropylene (1050P), or PVDF (1050F) |
1 in raised face ANSI/DIN flange
|
| Weight | |
| Aluminum (1050A) |
23 lb
|
| Conductive Polypropylene (1050C) and Polypropylene (1050P) |
18 lb
|
| Hastelloy (1050H) |
41 lb
|
| PVDF (1050F) |
26 lb
|
| Stainless Steel (1050S) with conductive polypropylene center |
36.3 lb
|
| Stainless Steel (1050S) with polypropylene center |
37.3 lb
|
| Stainless Steel (1050S) with aluminum center |
41.4 lb
|
| Wetted parts include material(s) chosen for seat, ball, and diaphragm options, plus the pump’s material of construction | |
| 1050A |
Aluminum
|
| 1050H |
Hastelloy
|
| 1050C and 1050P |
Polypropylene
|
| 1050F |
PVDF
|
| 1050S |
Stainless Steel
|
| Non-wetted external parts | |
| Aluminum (1050A) |
aluminum, coated carbon steel
|
| Hastelloy (1050H) |
hastelloy, stainless steel, polypropylene or aluminum (if used in center section)
|
| Plastic (1050P, 1050C, and 1050F) |
stainless steel, polypropylene
|
| Stainless Steel (1050S) |
stainless steel, polypropylene or aluminum (if used in center section)
|
| Reference Information | |
| Maximum Storage Time (varies with conditions) |
2 years
|
| Maximum Lifetime (varies with operating conditions and maintenance) |
10 years
|
| Power Efficiency Factor (varies based on pump configuration, operating parameters, and material) |
1.61 gal air consumed/1 gal fluid pumped at 70 psi
|
| * Sound power measured per ISO-9614–2. ** Sound pressure was tested 3.28 ft (1 m) from equipment. All trademarks mentioned in this manual are the property of their respective owners. | |
